Author: slaanesh

Re-enabling Steam Runtime in the Steam package

slaanesh 1 Comment

Due to some issues with libraries in an upcoming Steam client update, I’m forced to re-enable the Steam runtime (Ubuntu libraries) in Fedora’s Steam package. This means that all dependencies are no longer needed but the size of the Steam client can get ridiculously high on the system on where it is installed. For comparison, see the difference in size for an installation that uses the Steam runtime and one that doesn’t (the SteamApps folder is the folder where applications/games are installed):

$ du -hs --exclude=SteamApps
1.3G
$ du -hs --exclude=SteamApps --exclude=steam-runtime
992M

If we could run it without the Steam runtime enabled and also avoid downloading the runtime archives; then the client would weight nearly 500 mb less:

$ du -hs --exclude=SteamApps --exclude=steam-runtime*
805M

Let’s hope that in the future Valve will not mandate the use of Ubuntu libraries for long and will standardize on a specific set of common libraries.

I’ve updated the repository page with updated instruction and pushed updated packages both to the repository and in RPMFusion. Starting from package steam-1.0.0.43-9 the Steam runtime is left at the default value (enabled).

Steam is now in RPMFusion!

slaanesh 32 Comments

steamThe Steam package is now available in the RPMFusion repositories. It is currently in the updates-testing repository, but it can be installed anyway directly if you have the RPMFusion repositories enabled.

http://download1.rpmfusion.org/nonfree/fedora/updates/testing/19/i386/

The package is currently 32 bit only, but it can be installed easily also on a 64 bit system. In fact, I’m currently running nearly 70 games on my 64 bit system. For details on the package, look at my now-obsolete Steam repository page.

To perform the installation today, make sure to have both RPMFusion free and non free repositories enabled and perform the following command as root:

yum -y --enablerepo=rpmfusion-nonfree-updates-testing install steam

The Steam package has some profiles enabled to avoid using the Ubuntu Steam Runtime, which produces graphical artifacts and sound issues when run in Fedora. To avoid any problems, please log out and login again or reboot the system prior to using Steam for the first time!

Steam games require the S3 Texture compression library for running on Open Source drivers, and the package already takes care of installing it for you.

Steam and Oculus Rift

slaanesh 1 Comment

oculus

I’ve just updated the Steam package to the latest release (1.0.0.43) and in addition to the Steam controller support there are now udev rules for the Oculus Rift! This is the changelog content:

$ cat /usr/share/doc/steam-1.0.0.43/changelog | head -5
steam (1.0.0.43) precise; urgency=low

  * Update udev rules to support front panel and Oculus Rift
  * Demote jockey-common dependency to Recommends

And this is the content of the UDEV rules’ file:

$ cat /usr/lib/udev/rules.d/99-steam-controller-perms.rules
#USB devices
SUBSYSTEM=="usb", ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2202", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="28de", ATTRS{idProduct}=="2202", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="28de", ATTRS{idProduct}=="1101", MODE="0666"
SUBSYSTEM=="usb", ATTRS{idVendor}=="28de", ATTRS{idProduct}=="1051", MODE="0666"
# Oculus HID Sensor naming and permissioning
KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="2833", MODE="0666"

Would you consider buying an Oculus if Steam games start to support it?

Some updates to repositories

slaanesh Leave a comment

I’ve pushed some updates for the repositories.

Cdrtools now ship with shared libraries enabled and a fix for Kernel Capabilities on RHEL/CentOS 6 and Fedora distributions. There was a regression introduced in the packaging of version 3.01a17 which was disabling capabilities on the binaries. Along with this the SPEC file was simplified and compile options were aligned with current policies.

Skype has been updated with some rpmlint fix and now introduce the PULSE_LATENCY_MSEC=30 environment setting for Fedora 20 systems and Purple Skype plugin is now available for both i686 and x86_64.

FreeBSD 10.0-CURRENT X.org repository (amd64)

slaanesh 2 Comments

I’ve just pushed a repository to the site that contains the very latest X.org packages for FreeBSD 10.0. All packages have been built with poudriere. The repository contains the following ports:

x11/xorg
x11/xorg-minimal
x11/nvidia-driver
x11/nvidia-settings
x11/nvidia-xconfig
multimedia/vdpauinfo
multimedia/libva
ports-mgmt/poudriere-devel

It should be everything required for running an (experimental) updated X.org stack on FreeBSD 10. Packages are built with the following /etc/make.conf settings:

SVN=/usr/bin/svnlite
SVN_UPDATE=yes
WITH_NEW_XORG=yes
WITH_KMS=yes
WITH_GALLIUM=yes
MALLOC_PRODUCTION=yes

The ports tree used to build all packages is generated from this:

  • Updated ports tree at 24th September 2013.
  • Niclas Zeising’s patch revision of 24th September 2013 that updates all the Mesa stack and enables experimental devd configuration of devices for FreeBSD 10.
  • Updated Nvidia driver and utilities at version 325.15.

Please note that the repository is for amd64 platforms only.

To enable the repository just add/replace this line to your current PKGNG repository configuration:

packagesite: https://negativo17.org/freebsd/xorg/

Currently, the proprietary Nvidia driver make my system crash on me with the following messages in the log; any hint for solving it would be greatly appreciated:

kernel: nvidia0:  on vgapci0
kernel: vgapci0: child nvidia0 requested pci_enable_io
kernel: vgapci0: child nvidia0 requested pci_enable_io
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
syslogd: kernel boot file is /boot/kernel/kernel
kernel: NVRM: RmInitAdapter failed! (0x26:0xb:1179)
kernel: nvidia0: NVRM: rm_init_adapter() failed!
kernel: 
kernel: 
kernel: Fatal trap 12: page fault while in kernel mode
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
kernel: ACPI Warning: \_SB_.PCI0.AGP_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130823/nsarguments-97)
syslogd: kernel boot file is /boot/kernel/kernel
kernel: NVRM: RmInitAdapter failed! (0x26:0xb:1179)
kernel: nvidia0: NVRM: rm_init_adapter() failed!
kernel: 
kernel: 
kernel: Fatal trap 12: page fault while in kernel mode
kernel: cpuid = 1; apic id = 01
kernel: fault virtual address   = 0x8
kernel: fault code              = supervisor read data, page not present
kernel: instruction pointer     = 0x20:0xffffffff81d151f4
kernel: stack pointer           = 0x28:0xfffffe01198f1590
kernel: frame pointer           = 0x28:0xfffffe01198f1670
kernel: code segment            = base 0x0, limit 0xfffff, type 0x1b
kernel: = DPL 0, pres 1, long 1, def32 0, gran 1
kernel: processor eflags        = interrupt enabled, resume, IOPL = 3
kernel: current process         = 1425 (Xorg)
kernel: trap number             = 12
kernel: panic: page fault
kernel: cpuid = 1
kernel: KDB: stack backtrace:
kernel: #0 0xffffffff808ea690 at kdb_backtrace+0x60
kernel: #1 0xffffffff808b2245 at panic+0x155
kernel: #2 0xffffffff80c8877a at trap_fatal+0x37a
kernel: #3 0xffffffff80c88a47 at trap_pfault+0x2b7
kernel: #4 0xffffffff80c88206 at trap+0x5e6
kernel: #5 0xffffffff80c714f2 at calltrap+0x8
kernel: #6 0xffffffff81d322a3 at nvidia_dev_dtor+0x23
kernel: #7 0xffffffff807acc29 at devfs_fpdrop+0xa9
kernel: #8 0xffffffff807ad5c2 at devfs_open+0x142
kernel: #9 0xffffffff80d40a52 at VOP_OPEN_APV+0x92
kernel: #10 0xffffffff8095a576 at vn_open_vnode+0x216
kernel: #11 0xffffffff8095a188 at vn_open_cred+0x358
kernel: #12 0xffffffff80953801 at kern_openat+0x261
kernel: #13 0xffffffff80c89067 at amd64_syscall+0x357
kernel: #14 0xffffffff80c717db at Xfast_syscall+0xfb

Complex setup with Nvidia Optimus / Nouveau Prime on Fedora 19

slaanesh 22 Comments

First of all I would like to say some thanks to the X.org community. Their work is awesome, and the fact I can make my setup work on entirely X.org components it’s something I never thought possible when XFree86 was still around. I personally think that looking at an Optimus laptop with Intel and Nouveau running is a tremendous achievement.

optimus_technology_badgeNow, back to the topic.

My laptop at work is a Dell Latitude E6430. Comes loaded with features and I really like it. Among the various features there’s the fact that this is an Nvidia Optimus enabled laptop, sporting both an Intel video card and an Nvidia one:

$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)

This one is a muxless laptop of the worst kind: video outputs are connected only to specific chips!

LVDS (Internal panel)Intel
VGA (not usable along with the docking station one)Intel
VGA (Docking station)Intel
DVINvidia
DVI (Docking station)Nvidia
DisplayPort (Docking station)Nvidia
HDMINvidia

So to use an external HDMI connection at home you need to drive it through the Nvidia card, it doesn’t matter if Optimus is enabled or not. I regularly use it docked with the lid closed, external keyboard and mouse and 2 external monitors connected to the VGA and DVI outputs of the docking station. Basically while I’m at the office it looks like a normal desktop computer; but sometime I need to disconnect it to go on a meeting; and sometimes I use it at home to play games as well.

Guess what? Free drivers, proprietary drivers, UEFI, UEFI secure boot, multi monitor, outputs changing on the fly… all sorts of fun! I’m impressed by the fact that it all works together.

There are four modes on which I can operate the system:

  • Optimus enabled, free drivers for both Intel and Nvidia cards
  • Optimus enabled, free driver for Intel and proprietary driver for the Nvidia card
  • Optimus disabled, free driver for the Nvidia card
  • Optimus disabled, proprietary driver for the Nvidia card

Each one has its drawbacks, so let’s explain each setup a bit. At the end of the post I’ve made a table with all the pros and cons of each solution.

My current setup is:

  • Fedora 19 x86_64
  • Kernel 3.11.1 (stock Fedora)
  • Nouveau DDX 1.0.9 (stock Fedora)
  • Intel DDX 2.21.12 (stock Fedora)
  • Nvidia proprietary drivers 325.15 (from my repository)
  • VDPAU library 0.7 (stock Fedora)
  • Mesa libraries 9.2 (20130919 prerelease, stock Fedora)

UEFI / legacy bios

If secure boot is enabled; there’s no way to use the proprietary Nvidia driver without fiddling with UEFI keys. The module is built separately from the kernel package; so there’s no way for it to have the same signature as the kernel.

When UEFI is enabled, the free drivers work fine and replace the efifb framebuffer driver with their own; thus giving proper modesetting at the correct resolution and a speedy and responsive terminal.

With the proprietary Nvidia driver, the efifb is not replaced; so the console still operates with it and the Nvidia driver only operates the X part. Unfortunately, using this method, the framebuffer console is slow as hell, the resolution is not optimal, and the EFI framebuffer is never exposed onto external monitors. In my case, pressing CTRL+ALT+Fx jumps me to the console that is shown in the closed laptop lid on the docking station; making it pretty useless.

So if you’re going to use the proprietary driver and you often use the console; make sure you’re using Bios mode and not UEFI. What UEFI could bring you is the Intel Rapid Start Technology which has been included in kernel 3.11; so make your choices depending on what you need.

Optimus disabled

When Optimus is disabled, I can freely use the proprietary Nvidia driver or the free Nouveau driver.

Both solution work; unfortunately performance and feature wise Nouveau cannot compete with the proprietary Nvidia driver.

My main issue is power management; with the Nvidia driver the battery lasts a lot more and the performance difference is abysmal. Nouveau performance is really poor with 3D games (especially Steam commercial ones, with Doom 3 it works fine) and there’s absolutely no power management; at least on my laptop. By playing with performance levels I was only able to overheat the card!

Another thing that does not work with Nouveau is the docking station removal. With the Nvidia proprietary driver I’m able to do the following:

– Disconnect from the docking station: output goes from the external VGA and DVI monitors to the internal LVDS display.

– Reconnect to the docking station: internal LVDS display gets shut off and output goes to VGA and DVI monitors as they were before; one next to the other. I can even close the lid and the computer doesn’t go in standby.

With Nouveau, I’m able to disconnect from the docking station but when reconnecting I need to reconfigure the monitors in their place; and after this, when closing the lid I need to wake up again the computer because it goes on standby.

With the recent Xrandr support to the proprietary drivers I don’t even need to edit che X.org configuration file. Whether I use nvidia-settings or Gnome Displays panel the result is reflected in both implementations and preserved across boots.

Optimus with proprietary Nvidia drivers

To configure Optimus with proprietary drivers perform the following. First of all install the proprietary driver as normal. Now edit the /etc/grub2.cfg file and remove some parameters from the kernel command line. This is required because the Intel driver still need to operate with its KMS driver. So, from this:

nouveau.modeset=0 rd.driver.blacklist=nouveau nomodeset gfxpayload=vga=normal

you should go to this:

nouveau.modeset=0 rd.driver.blacklist=nouveau

After this, edit/recreate the /etc/X11/xorg.conf file with the following contents:

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "intel"
    Driver "intel"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Option "ConstrainCursor" "no"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    #Option "UseDisplayDevice" "none"
EndSection

Make sure to set the correct bus ID for the Nvidia card; for instructions look in the Nvidia documentation. Contrary to what’s written in the Nvidia documentation I had to use the intel DDX driver for the Intel card instead of the modesetting one. With modesetting I’m not able to get any output on the Intel card.

Upon reboot, you will see KMS running for the Intel card (Plymouth screen) and then the login manager appears on the Nvidia attached panels, while the Intel outputs shut off.

After logging in, you can also check that both drivers are running with the following commands:

$ lsmod | egrep "i915|nvidia"
nvidia               9365874  51 
i915                  651861  2 
i2c_algo_bit           13257  1 i915
drm_kms_helper         50239  1 i915
drm                   274480  5 i915,drm_kms_helper,nvidia
i2c_core               34242  7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
video                  19104  1 i915
$ dmesg | egrep -i "i915|nvidia"
[    4.589447] nvidia: module license 'NVIDIA' taints kernel.
[    4.595759] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    4.601728] nvidia 0000:01:00.0: enabling device (0004 -> 0007)
[    4.613153] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[    4.613159] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  325.15  Wed Jul 31 18:50:56 PDT 2013
[    4.738199] i915 0000:00:02.0: setting latency timer to 64
[    4.768878] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[    5.088964] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.088966] i915 0000:00:02.0: registered panic notifier
[    5.088982] i915: No ACPI video bus found
[    5.420554] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[    5.966583] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[  198.017862] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X

To light up the other display some xrandr command is required (to enable these at boot add them in /etc/X11/xinit/xinitrc.d):

$ xrandr --setprovideroutputsource Intel NVIDIA-0
$ xrandr --auto
$ xrandr --output VGA1 --left-of DP-1

Your Intel monitor should now have an extended desktop managed by the Nvidia card. Move windows around, and launch some commands to see that wherever you go you’re using the Nvidia accelerated driver:

$ glxinfo| grep "OpenGL version string"
OpenGL version string: 4.3.0 NVIDIA 325.15
$ vdpauinfo | grep -i string
Information string: NVIDIA VDPAU Driver Shared Library  325.15  Wed Jul 31 18:14:57 PDT 2013

Everything seems to work, except output manipulation. Xrandr, Gnome and Nvidia drivers have a different view.

Xrandr view:

$ xrandr -q | grep conn
VGA-0 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
LVDS-0 connected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 connected 1680x1050+1680+0 (normal left inverted right x axis y axis) 474mm x 296mm
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)

This is what I have in the Nvidia settings panel and in the Gnome Displays panel for the monitors; in one case I don’t see any monitor, in another one I have the internal LVDS display shown as enabled while in reality is not and with the button locked in the “On” position:

gnome-optimus

Primary monitor assignment does not work as well. I usally have the Gnome panel on the left monitor. If I try to move it from the Nvidia output I get this feedback:

$ xrandr --output VGA1 --primary
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  139 (RANDR)
  Minor opcode of failed request:  30 (RRSetOutputPrimary)
  Serial number of failed request:  53
  Current serial number in output stream:  55

Putting monitor problems aside, running in this mode does not really give any benefit compared to running it with Optimus disabled and the proprietary Nvidia driver installed. Both cards are running with power management, but the Nvidia card is never shut off, so it doesn’t use less power than when running standalone.

There’s no way to turn off the card with vga_switcheroo, all 3d libraries come from the Nvidia drivers and your desktop is being rendered by the Nvidia card.

Prime (Optimus) with free Nouveau drivers

Here comes the juicy part. With enough maturity on the Nouveau side this would be the perfect setup. To start with this implementation; nothing is required, just install Fedora and everything should be already set up. Booting it shows the Plymouth logo on both outputs.

Login in the system, and check that both drivers are running:

$ lsmod | egrep "i915|nouveau"
nouveau               943445  1 
i915                  651861  4 
mxm_wmi                12865  1 nouveau
ttm                    79865  1 nouveau
i2c_algo_bit           13257  2 i915,nouveau
drm_kms_helper         50239  2 i915,nouveau
drm                   274480  8 ttm,i915,drm_kms_helper,nouveau
i2c_core               34242  7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau,videodev
wmi                    18697  3 dell_wmi,mxm_wmi,nouveau
video                  19104  2 i915,nouveau
$ dmesg | egrep "i915|nouveau"
[    3.155259] i915 0000:00:02.0: setting latency timer to 64
[    3.163318] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[    3.185671] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    3.517135] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.517136] i915 0000:00:02.0: registered panic notifier
[    3.517156] i915: No ACPI video bus found
[    3.774151] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.774654] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1e00a1
[    3.774659] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[    3.774663] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
[    3.778240] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.787999] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.788002] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.788086] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.788087] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    4.624674] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    4.624679] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[    4.624845] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    4.624850] nouveau  [   VBIOS][0000:01:00.0] version 70.08.a8.00.8d
[    4.625140] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[    4.625144] nouveau  [   VBIOS][0000:01:00.0] running init tables
[    4.753512] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    4.753514] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    4.753515] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    4.779859] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    4.779863] nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
[    4.779867] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    4.783179] nouveau  [     DRM] VRAM: 1024 MiB
[    4.783180] nouveau  [     DRM] GART: 1048576 MiB
[    4.783184] nouveau  [     DRM] TMDS table version 2.0
[    4.783185] nouveau  [     DRM] DCB version 4.0
[    4.783199] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[    4.783201] nouveau  [     DRM] DCB outp 01: 020323a6 0f220010
[    4.783202] nouveau  [     DRM] DCB outp 02: 040433b6 0f220010
[    4.783203] nouveau  [     DRM] DCB outp 03: 08024382 00020010
[    4.783204] nouveau  [     DRM] DCB outp 04: 02032362 00020010
[    4.783205] nouveau  [     DRM] DCB outp 05: 04043372 00020010
[    4.783206] nouveau  [     DRM] DCB outp 06: 02011300 00000000
[    4.783207] nouveau  [     DRM] DCB conn 00: 00000041
[    4.783209] nouveau  [     DRM] DCB conn 01: 00000100
[    4.783210] nouveau  [     DRM] DCB conn 02: 00001246
[    4.783211] nouveau  [     DRM] DCB conn 03: 00002346
[    4.783212] nouveau  [     DRM] DCB conn 04: 00010461
[    4.783213] nouveau  [     DRM] DCB conn 05: 00000500
[    4.783878] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[    4.784072] nouveau  [     DRM] 3 available performance level(s)
[    4.784075] nouveau  [     DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[    4.784076] nouveau  [     DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[    4.784078] nouveau  [     DRM] 3: core 672MHz shader 1344MHz memory 1569MHz voltage 980mV
[    4.784079] nouveau  [     DRM] c: core 202MHz shader 405MHz memory 324MHz
[    4.789392] nouveau  [     DRM] MM: using COPY0 for buffer copies
[    4.925967] nouveau  [     DRM] allocated 1680x1050 fb: 0x60000, bo ffff88021fc21400
[    4.926065] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    4.926068] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1

Poking around with xrandr will give you totally different outputs from the Nvidia driver:

$ xrandr -q | grep conn
LVDS1 connected (normal left inverted right x axis y axis)
VGA1 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
LVDS-2 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 1680x1050+1680+0 (normal left inverted right x axis y axis) 474mm x 296mm
HDMI-1 disconnected (normal left inverted right x axis y axis)
VGA-2 disconnected (normal left inverted right x axis y axis)

But at least they’re consistent with the Gnome Displays panel:

gnome-prime

For reasons I don’t understand the Nvidia card appears twice in 2 different but identical providers:

$ xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x96 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:Intel
Provider 1: id: 0x66 cap: 0x7, Source Output, Sink Output, Source Offload crtcs: 2 outputs: 5 associated providers: 2 name:nouveau
Provider 2: id: 0x66 cap: 0x7, Source Output, Sink Output, Source Offload crtcs: 2 outputs: 5 associated providers: 2 name:nouveau

With the tests I made, there’s no apparent difference when using one or the other. Usage of one card or the other is driven by the DRI_PRIME environment variable. If it’s set to 0, commands run on the Intel card, if it’s set to 1 they will run on the Nvidia card. For example:

$ DRI_PRIME=1 vdpauinfo | grep -i string
Information string: G3DVL VDPAU Driver Shared Library version 1.0

Or even better, to check OpenGL status:

$ glxinfo | grep -e 'OpenGL.*string.*'
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile 
OpenGL core profile version string: 3.1 (Core Profile) Mesa 9.2.0
OpenGL core profile shading language version string: 1.40
OpenGL version string: 3.0 Mesa 9.2.0
OpenGL shading language version string: 1.30
$ DRI_PRIME=1 glxinfo | grep -e 'OpenGL.*string.*'
OpenGL vendor string: nouveau
OpenGL renderer string: Gallium 0.4 on NVC1
OpenGL core profile version string: 3.1 (Core Profile) Mesa 9.2.0
OpenGL core profile shading language version string: 1.40
OpenGL version string: 3.0 Mesa 9.2.0
OpenGL shading language version string: 1.30

Unfortunately the desktop is very slow, it’s rendered by the Intel driver and put on the Nvidia card for display. I’ve tried changing priority in vga_switcheroo prior to starting X, setting the DRI_PRIME=1 variable at boot, use xrandr to change the provider output source etc. to no avail; the desktop can run only on the first card or it doesn’t work. Usually I get a black screen upon GDM start.

There’s no power management as well, so the Intel card runs normally but the Nvidia one is always on and stuck in an intermediate performance level.

When docking it; I get cloned outputs on all external displays at a very low resolution. Same issue with the Optimus disabled Nouveau driver; the outputs need to be rearranged, the lid closed and the computer needs to be woken up from standby.

Optimus cards power operation

Dual cards can be shut down on demand through vga_switcheroo. For example, login in your system as root without X running. Look at the card status with the following command:

# cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Pwr:0000:01:00.0

This will tell you that the Integrated Graphics Display (IGD) is powered up (Pwr) and that is the primary display (+). To shut off the secondary video card, a single command is required:

# echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
# cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0

This will shutdown the Nvidia card. A look at the battery will tell you now that you have twice the power because the Intel card sucks very little power compared to the Nvidia one.

Turn the card on again, and switch the framebuffer console to it:

# echo ON > /sys/kernel/debug/vgaswitcheroo/switch
# cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Pwr:0000:01:00.0
# echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch
[  879.436727] i915: switched off
# cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD: :Off:0000:00:02.0
1:DIS:+:Pwr:0000:01:00.0

This will move the framebuffer and your shell to the other Nvidia driven monitor and shut down the Intel card. Sweet, isn’t it?

Power management for automatic powerup/shutdown of cards in Optimus systems and runtime management will come in kernel 3.12; I’ve tested it by using the Fedora Rawhide kernel repository and the situation improves a lot:

# cat /sys/kernel/debug/vgaswitcheroo/switch 
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynPwr:0000:01:00.0

As you can see the second card is dynamically powered. Try to undock the system and check the status again: the second output is no longer needed so the second card shuts off:

# cat /sys/kernel/debug/vgaswitcheroo/switch 
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynOff:0000:01:00.0

Now, with the laptop undocked, launch a command on the second card:

# DRI_PRIME=1 vdpauinfo | grep -i string
Information string: G3DVL VDPAU Driver Shared Library version 1.0
# cat /sys/kernel/debug/vgaswitcheroo/switch 
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynPwr:0000:01:00.0

You will notice a slight delay before the command output is returned, but the card is powered on again! This is awesome. Now, after 1 or 2 seconds look again at the card:

# cat /sys/kernel/debug/vgaswitcheroo/switch 
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :DynOff:0000:01:00.0

It’s shut off! Dock the laptop again and the monitor should come up again.

Keep in mind that powering up and down cards is a totally different things than power managing and adjusting clocks etc. for a running card. This make the Nvidia card shutdown automatically, not regulate its power levels during usage.

Summary

A Prime enabled laptop does not have any configuration and does not require any manual configuration. The fact that the Nvidia card can power down itself is great and doubles my battery duration! On the screen I have KMS consoles without huge fonts and can have UEFI secure boot enabled! This is really awesome.

Unfortunately though, without proper Nouveau power management and performance improvements added to the fact that I need to reconfigure monitors everytime I move (sometime the output gets all black as well when docking); the experience is not that great. I don’t know why, but when I’m undocked and using only the LVDS internal panel, the Intel performance is fantastic. Problems arise only when it’s docked and Nouveau is enabled as well.

My old laptop was working flawlessly with Nouveau. I didn’t play games on it, it was not Optimus based and the driver was generally working better.

OptimusDisabledDisabledEnabledEnabled (Prime)
DriverNvidiaNouveauIntel/NvidiaIntel/Nouveau
ConfigurationVery easy.Already set up.Very complexAlready set up.
Card power
management		Perfect!Poor performance, no power management.Nvidia card always powered up, renders for all screens.Dynamic video card switching works fine, Nouveau performance not.
Optimus card
power management		N.A.N.A.Nvidia card can't power down.Perfect!
Docking / UndockingPerfect!Manual intervention requiredManual intervention required, unreliableManual intervention required
PerformancePerfect!Pretty bad.Very good, some tearing when moving windows.Bad when using the Nvidia card for output, otherwise perfect!
Bios ConsoleVGA, no KMS.Perfect (KMS)!Perfect (KMS on Intel).Perfect (KMS)!
UEFI ConsoleUses efifb. Somewhat slow.Perfect (KMS)!Perfect (KMS on Intel).Perfect (KMS)!
UEFI secure bootCan't work.Perfect!Can't work.Perfect!

Summing up, my current choice is for the Optimus disabled setup with Nvidia drivers. I can play games, dock, undock, power management works ok and I can drive all outputs easily. And if I need to go in a meeting I don’t need to be extra cautious in shutting down virtual machines, because the system might not go up again. It’s kinda retro style when booting with the text console and battery does not last more than 3 hours, but I can bear it.

I’m impressed by the current X.org improvements of the last years and really looking forward to new developments. Sometimes just for fun I often switch back to the free drivers to check the status; like the new dynamic power management in kernel 3.12.

Let’s hope Nvidia collaboration becomes better and the new documentation does not simply stop to what has been announced.

FreeBSD 10; new X.org, KMS, PKGNG, poudriere…

slaanesh 10 Comments

freebsdLately I’ve been playing with FreeBSD and its new technologies; PKGNG & poudriere and the new KMS/X.org stack that has been pushed to HEAD.

This is just my short how to for updating a FreeBSD CURRENT installation (10.0 at the moment of writing) with the new source code available on the FreeBSD servers.

Starting from FreeBSD 10.0 updating the base system through sources is performed with Subversion; and a lite version of it is shipped in the base system.

Get the source

First of all we must proceed in downloading the full sources from the FreeBSD servers:

svnlite checkout svn://svn0.eu.FreeBSD.org/base/head /usr/src
svnlite checkout svn://svn0.eu.FreeBSD.org/ports/head /usr/ports
svnlite checkout svn://svn0.eu.FreeBSD.org/doc/head /usr/doc

The ports directory; which is quite large; can also be downloaded and put in place with the following commands:

portsnap fetch
portsnap extract

This will populate all the directories with the required source code.

Define configuration for binaries

After getting the sources; we need to define some variables in the /etc/make.conf file to play with the new technologies being introduced.

Many things like PKGNG, CLANG, etc. have been enabled by default in recent builds, so the list is quite small:

# These lines are required to make sure that the make update command works
SVN=/usr/bin/svnlite
SVN_UPDATE=yes

# These lines enable the new X.org server (1.12.4) new Mesa libraries, KMS support, etc.
WITH_NEW_XORG=yes
WITH_KMS=yes
WITH_GALLIUM=yes

# Line for custom kernel configuration
KERNCONF=CUSTOM

FreeBSD still ships by default with X.org server 1.7; Mesa 7.x and a lot of outdated components. The new X.org components have not been switched yet to default; so specific lines need to be put in place for compiling the required port versions.

After this file, we need to create the kernel configuration file that is specified by the KERNCONF variable. I’m happy with the GENERIC kernel as I run it on multiple systems; so I will not change any option inside the configuration. What I do is turn off debugging support that is enabled by default on unrealeased FreeBSD versions.

So let’s create /usr/src/sys/amd64/conf/CUSTOM and put the following content inside:

include GENERIC
ident CUSTOM

# Disable debugging options
nooptions DDB
nooptions GDB
nooptions DEADLKRES
nooptions INVARIANTS
nooptions INVARIANT_SUPPORT
nooptions WITNESS
nooptions WITNESS_SKIPSPIN
nooptions MALLOC_DEBUG_MAXZONES

This kernel configuration file does nothing except specifying a new name and disabling the debugging options already enabled by default in the FreeBSD kernel. This way, when I update the sources; I don’t need to pay attention at which features are new or change in the GENERIC kernel. Pretty smart system.

Update the base system

To update the system, launch the following commands as root (you can of course build the system without being root, but for this short how to this is much clear):

cd /usr/src
make -s update
make -s -j5 buildworld
make -s -j5 buildkernel

The various make commands will make sure that you update the system with the latest sources and build all the toolchain required to compile the system and all the system commands and libraries. After this we’re good to go to install the new kernel and reboot the system:

make -s installkernel
shutdown -r now

When rebooting, choose “Boot in single user mode” (boot -s at the prompt) and perform the following commands to mount the root system in read/write mode:

mount -u /
mount -a -t ufs

Then check for conflicting configuration files that are to be updated (in my case 90% of the time I just need to press “i” to install the new configuration file); install the updated binaries and reboot.

mergemaster -p
cd /usr/src
make -s installworld
mergemaster
reboot

Configure poudriere for generating packages

FreeBSD 10 does not ship anymore with legacy package management tools but only with PKGNG; so the old way of building ports feels “obsolete” after you’ve been using a Linux distribution with package management for years. Thanks, poudriere comes to the rescue.

First of all we install the bleeding edge poudriere package (hey, we’re on 10.0-CURRENT; so we are already bleeding!). To install the package, go to the ports directory and install it:

cd /usr/ports/ports-mgmt/poudriere-devel
make install

After installing, we need to configure it and create a FreeBSD jail for building packages and some variables in poudriere’s configuration file.

cd /usr/local/etc/
cp poudriere.conf.sample poudriere.conf

Personally, this is what I have in my configuration file:

NO_ZFS=yes
FREEBSD_HOST=ftp://ftp.freebsd.org
RESOLV_CONF=/etc/resolv.conf
BASEFS=/share
USE_PORTLINT=no
USE_TMPFS=yes
DISTFILES_CACHE=/usr/ports/distfiles
CHECK_CHANGED_OPTIONS=yes
CHECK_CHANGED_DEPS=yes
NOLINUX=yes

As you can see I don’t have a ZFS filesystem, I’m not interested in Linux support and I’m sharing the downloaded source tarball directory with the ports system.

The /share directory is a separate mount point in my system where I link the base FreeBSD source folder, the ports directory, the documentation source directory and all the poudriere jails, work queues and package repositories. Make sure to have plenty of space!

We need to replicate the /etc/make.conf of our base system inside the jail to make sure all the packages get the correct settings. Create the file /usr/local/etc/poudriere.d/10-amd64-make.conf with the following contents:

WITH_NEW_XORG="yes"
WITH_KMS="yes"

Now we’re ready to start with poudriere. Issue the following commands:

poudriere ports -c
poudriere jail -c -m ftp -v 10.0-CURRENT -j 10-amd64

This will download a recent copy of the ports tree and create a FreeBSD jail taking the most recent snapshot of 10.0-CURRENT directly from the FreeBSD ftp servers! Awesome.

To update the ports tree, just issue the following command:

poudriere ports -u

Now that we’re ready to go, it’s time to list what ports we would like to build. Create a text file and put the list of ports you want to build inside of it; for example:

x11/xorg
x11/xorg-minimal
x11/nvidia-driver
x11/nvidia-settings
ports-mgmt/poudriere-devel

If you want some additional specific per-port configuration options, you can use the options subcommand. For example; to disable Linux support in the Nvidia driver, perform the following command:

poudriere options x11/nvidia-driver

and deselect Linux; much like you would do using standard ports.

Generate package repositories from the ports collection

Now that all is in place it’s time to trigger the builds. Perform the following command:

poudriere bulk -f portslist.txt -j 10-amd64

Poudriere will take care of setting a parallel task for each cpu you have and make sure all the dependencies are built in the correct order.

After munching for a long time (better go hack some Ingress portals or leave it running night long…) you will have a repository ready for use on your system. Depending on the paths/names you’ve chosen for the FreeBSD jail and for the configuration file you will have something like the following:
# cd /share/data/packages/10-amd64-default
# ls -l
total 176
drwxr-xr-x  2 root  wheel   8704 Sep 13 18:35 All
drwxr-xr-x  2 root  wheel    512 Sep 13 11:51 Latest
-rw-r--r--  1 root  wheel  12508 Sep 13 18:35 digests.txz
-rw-r--r--  1 root  wheel  46344 Sep 13 18:35 packagesite.txz
-rw-r--r--  1 root  wheel  97092 Sep 13 18:35 repo.txz
You just need to add the repository to your system and you’re ready to install packages! The repository also contains the latest pkg package for distribution.

This folder can be published on the web, left locally or wherever you choose. The only thing you need to do is enable the repository on your system(s) through the /usr/local/etc/pkg.conf file.

As an example, if you want to use the current package repository directly on the system where you’ve built everything just leave the following line in the configuration file:

packagesite: file:///share/data/packages/10-amd64-default

Using package repositories

Finally a great package management for FreeBSD. First of all update the repository definition:

pkg update

and then install the packages you want! For example:

pkg install xorg nvidia-driver

PKGNG will take care of everything.

Updating packages

To update packages, just re-update the ports tree with poudriere, rebuild with the bulk command (only the changed packages or the packages with changed dependencies will be rebuilt!) and upgrade your system!

poudriere ports -u
poudriere bulk -f portslist.txt -j 10-amd64
pkg update
pkg upgrade

Awesome.

Using OpenConnect with RSA Software Tokens in Fedora / RHEL / CentOS

slaanesh 3 Comments

OpenConnect is the Open Source alternative for the proprietary Cisco AnyConnect client. Our company is using the Cisco AnyConnect client along with PIN protected RSA Software Tokens for the authentication.

Looks like a complicated solution if you don’t have your corporate Windows client around; there’s no Cisco AnyConnect client for Linux with RSA Software Token support and the RSA application itself it’s only for Windows.

Guess what? It is not complicated at all and does not require WINE or any other tool to run the Windows app. It does not require the broken Cisco AnyConnect client either.

Update 10th June 2014: New instructions for new RSA Token Converter 3.0.
Update 10th October 2014: RSA Token Converter no longer needed.

Installation

Install the required software to import the token and the OpenConnect client itself:

# yum -y install NetworkManager-openconnect stoken-cli stoken-gui

If you’re using RHEL or CentOS up to 6.3 please reboot your system as the bundled NetworkManager is not able to reload plugins through dbus; otherwise if you’re running Fedora or RHEL/CentOS 6.4 or later you can directly proceed.

Token manipulation

Use stoken to import your token, choosing between the various options:

$ stoken import --token 2000123456...
$ stoken import --token com.rsa.securid.iphone://ctf?ctfData=2000123456...
$ stoken import --file mytoken.sdtid

Leave blank for the password request if you don’t want to password protect your token. Launch the command line program or the graphical program to get the passcode. The pin must be identical to the one you’ve set when first connecting to the VPN; otherwise the generated passcode will not match with the one generated on the VPN server:

$ stoken
Enter PIN: 1234
32031342

Alternatively you can use the GTK based stoken-gui program:

Stoken

Remove token PIN

To further speed up things; you can issue the following command to remove the pin request when opening the token (both command line and graphical):

$ stoken setpin
Enter new PIN: 1234
Confirm new PIN: 1234
$ stoken
32031342

Configuration

Create a new OpenConnect VPN through the VPN wizard of NetworkManager; the only required parameter is the server name.

If you have at least Fedora 20 or (probably) RHEL 7 with NetworkManager-openconnect 0.9.8 you can also paste the RSA Soft Token in the text box or use the Stoken file for passcode generation.

Openconnect1

Connection

Upon connection, you will be asked your username and RSA passcode. If you have enabled Soft Token integration with the PIN saved in ~/.stokenrc you will be asked only the username.

Openconnect2

Initiating the connection from the command line can be used as well. This method also enables you to avoid entering the PIN; offering the same functionality as NetworkManager-openconnect 9.8.0 on all Fedora releases and CentOS/RHEL 6:

sudo cp ~/.stokenrc /root
sudo openconnect --token-mode=rsa vpn.example.com

Pretty easy, huh?